Tech4Examでは、学習スタイルに合わせてPDF版・デスクトップテストエンジン・オンラインテストエンジンの3つの形態をご用意しています。自宅のパソコンでじっくり解くもよし、移動中に6103の練習問題をスマートフォンで確認するもよし。Avaya ERS 8000 and Avaya VSP 9000 Implementationの対策を自分のペースで進められます。
Avaya 6103 試験概要:
| 認定ベンダー: | Avaya |
|---|---|
| 試験名: | Avaya ERS 8000およびAvaya VSP 9000導入試験 |
| 試験番号: | 6103 |
| 試験形式: | 多肢選択式 |
| 合格点: | 69–70% |
| 試験時間: | 90 分 |
| 関連資格: | Avaya ACIS / Avaya Services Technical Associate Implement |
| 対応言語: | 英語 |
| 出題数: | 68 |
| サンプル問題: | DOWNLOAD DEMO |
| 受験方法: | Pearson VUEを通じて実施される監督付き試験(テストセンターまたはオンラインでの受験が可能) |
| 前提条件: | Avaya ERS 8000およびVSP 9000スイッチに関する知識が推奨されます。トレーニングの受講または実務経験があることが望ましいです。 |
Avaya 6103 試験シラバストピック:
| セクション | 目標 |
|---|---|
| インストール | - ソフトウェアのインストールとハードウェアの接続 - VSP 9000 / ERS 8000の初期セットアップ |
| 導入のトラブルシューティング | - 各レイヤにおける導入エラーのトラブルシューティング |
| 設定 | - レイヤ1 / レイヤ2 / レイヤ3の機能 - スイッチクラスタ、冗長性、およびVLANの設定 |
| アーキテクチャ | - コンバージドキャンパスエッジおよびコアの設計特性 - ERS 8000およびVSP 9000のアーキテクチャとコンポーネント |
| 導入の検証 | - 設定の整合性の確認および冗長性の検証 |
Avaya ERS 8000 and Avaya VSP 9000 Implementationに関するよくあるご質問
6103試験はAvaya ERS 8000 and Avaya VSP 9000 Implementationの公式認定試験で、合格するとAvaya-Certificationの認定を取得できます。関連する認定には、Avaya ACIS / Avaya Services Technical Associate Implementなどがあります。Tech4Examでは、この試験の出題傾向に沿った68問の練習問題をご用意しています。
6103試験の出題数は68、制限時間は90 分です。出題数に対して使える時間は限られるため、1問あたりにかけられるペースを意識しながら解き進める必要があります。難問に時間を使いすぎず、確実に答えられる問題から拾っていく時間配分が得点を安定させる鍵になります。Tech4Examのテストエンジンで制限時間つきの模擬試験を繰り返し、本番と同じリズムで解く感覚を身につけておくことをおすすめします。
受験条件は見直される場合があります。お申し込みの前に、で最新の情報をご確認ください。
はい、Tech4Examでは6103練習問題の無料サンプルをご用意しています。68問の問題集の一部を事前にご確認いただけるので、内容や品質に納得してからご購入いただけます。ご購入後は365日間の無料アップデートが付き、期間終了後も50%割引で更新を継続いただけるため、常に最新の出題内容に沿って学習できます。
Tech4Examには返金保証があります。ご購入後60日以内に対応する試験を受験して不合格だった場合、全額返金をお申し込みいただけます。ただし、購入後3日以内の受験による不合格、ダウンロード後に実際の試験を受験しなかった場合、無料資料や有効期限切れのご注文は対象外となり、受験者の氏名はお支払い者の氏名と一致している必要があります。お申し込みの際は、受験票のコピーと公式のScore ReportのPDFを試験後2日以内にご提出ください。提出後7日以内に手続きが完了します。返金の代わりに、同等の試験資料2点を無料でお受け取りいただき、お手持ちの製品の更新サービスをそのまま継続する選択も可能です。納品は即時ダウンロード方式で、お支払い完了後1分以内にメールでお届けします。2時間経っても届かない場合はカスタマーサポートまでご連絡ください。インストールするパソコンの台数に制限はありません。
6103試験の出題範囲は5の領域に分かれています。主な領域として、「設定」、「導入の検証」、「アーキテクチャ」などが挙げられます。各領域の詳しい内訳については、このページ上部に掲載している試験シラバスをご確認ください。
Avaya ERS 8000 and Avaya VSP 9000 Implementation 認定 6103 試験問題:
Policy-based traffic policers and traffic shapers identify traffic using a policy (a contract). Traffic that conforms to this policy (a service contract) is guaranteed transmission, and nonconforming traffic is considered in violation.
Which two statements about how Policy-based policers and shapers treat violations are true? (Choose two.)
- A. Traffic shapers buffer and shape traffic, whereas traffic policers discard or re-mark excess traffic.
- B. Policy based-shaping drop packets exceeding the peak rate.
- C. Policing occur on ingress.
- D. Traffic shaper allows the traffic to exceed the line rate, whereas traffic policers prevent traffic from exceeding the line rate.
- E. Both traffic policers and traffic shapers support the marking and re-marking of DSCP and 802.1p, using filter actions.
正解:A、B 🗳️
解説: (Tech4Exam メンバーにのみ表示されます)
A technician is configuring a Link Aggregation connection from a stack of Ethernet Routing Switch (ERS) 5500 switches, to a core pair of ERS 8000 switches.
Which statement about the correct uplink configuration is true?
- A. Use unique MLT IDs for each stack of edge ERS 5500 switches.
- B. Distribute uplinks across different ERS 5500 switches in the stack.
- C. Disable autonegotiation and replace it with VLACP to identify single fiber fault failure.
- D. Enable Spanning Tree Protocol for the MLT when using it with SMLT in the core of the network.
正解:C 🗳️
Refer to the exhibit.
After checking the VLAN configuration using
the show vlan info basic, and the show
vlan info port commands, there are no ACTIVE MEMBER ports for VLAN-50.
What is causing this problem?
- A. The ports have not been configured as active for this VLAN.
- B. The default setting for this type of VLAN is potential.
- C. There are no devices connected to these ports.
- D. AppleTalk Protocol VLANs do not have ACTIVE MEMBERS.
正解:A 🗳️
How do the Switch Fabric (SF) modules provide bandwidth management across the I/O modules?
- A. Bandwidth management is shared across all installed SF modules.
- B. SF modules in slots SF1 and SF4 provide bandwidth management across the I/O modules.
- C. The SF module in slot SF1 provides bandwidth management for even numbered slots (2,4,6,8,10), while the SF module in slot SF4 provides bandwidth management for odd numbered I/O slots (1,3,5,7,9).
- D. The SF module in slot SF1 provides bandwidth management for the I/O modules in slots 1-5, while the SF module in slot SF4 provides bandwidth management for slots 6-10.
- E. The bandwidth management is handled by the CP modules.
正解:B 🗳️
解説: (Tech4Exam メンバーにのみ表示されます)
When configuring a new Ethernet Routing Switch (ERS) 8000 using the default interface, the attempt to load an ACLI configuration fails because the default interface is the CLI.
How is the ACLI interface obtained?
- A. by exiting the CLI and choosing ACLI at the interface manager prompt
- B. by changing the interface type in the config.cfg file
- C. by use the abort command, and entering 'no' at the default interface prompt
- D. by changing the ACLI boot flag and saving the boot configuration file
正解:A 🗳️

弊社は製品に自信を持っており、面倒な製品を提供していません。


-Sawasaki

