本当質問と回答の練習モード
現代技術のおかげで、オンラインで学ぶことで人々はより広い範囲の知識(350-050有効な練習問題集)を知られるように、人々は電子機器の利便性に慣れてきました。このため、私たちはあなたの記憶能力を効果的かつ適切に高めるという目標をどのように達成するかに焦点を当てます。したがって、CCIE 350-050練習問題と答えが最も効果的です。あなたはこのCCIE Wireless Exam (V2.0)有用な試験参考書でコア知識を覚えていて、練習中にCCIE Wireless Exam (V2.0)試験の内容も熟知されます。これは時間を節約し、効率的です。
現代IT業界の急速な発展、より多くの労働者、卒業生やIT専攻の他の人々は、昇進や高給などのチャンスを増やすために、プロの350-050試験認定を受ける必要があります。 試験に合格させる高品質のCCIE Wireless Exam (V2.0)試験模擬pdf版があなたにとって最良の選択です。私たちのCCIE Wireless Exam (V2.0)テストトピック試験では、あなたは簡単に350-050試験に合格し、私たちのCCIE Wireless Exam (V2.0)試験資料から多くのメリットを享受します。
350-050試験学習資料の三つバージョンの便利性
私たちの候補者はほとんどがオフィスワーカーです。あなたはCCIE Wireless Exam (V2.0)試験の準備にあまり時間がかからないことを理解しています。したがって、異なるバージョンの350-050試験トピック問題をあなたに提供します。読んで簡単に印刷するには、PDFバージョンを選択して、メモを取るのは簡単です。 もしあなたがCCIE Wireless Exam (V2.0)の真のテスト環境に慣れるには、ソフト(PCテストエンジン)バージョンが最適です。そして最後のバージョン、350-050テストオンラインエンジンはどの電子機器でも使用でき、ほとんどの機能はソフトバージョンと同じです。CCIE Wireless Exam (V2.0)試験勉強練習の3つのバージョンの柔軟性と機動性により、いつでもどこでも候補者が学習できます。私たちの候補者にとって選択は自由でそれは時間のロースを減少します。
信頼できるアフターサービス
私たちの350-050試験学習資料で試験準備は簡単ですが、使用中に問題が発生する可能性があります。350-050 pdf版問題集に関する問題がある場合は、私たちに電子メールを送って、私たちの助けを求めることができます。たあなたが新旧の顧客であっても、私たちはできるだけ早くお客様のお手伝いをさせて頂きます。候補者がCCIE Wireless Exam (V2.0)試験に合格する手助けをしている私たちのコミットメントは、当業界において大きな名声を獲得しています。一週24時間のサービスは弊社の態度を示しています。私たちは候補者の利益を考慮し、我々の350-050有用テスト参考書はあなたの350-050試験合格に最良の方法であることを保証します。
要するに、プロの350-050試験認定はあなた自身を計る最も効率的な方法であり、企業は教育の背景だけでなく、あなたの職業スキルによって従業員を採用することを指摘すると思います。世界中の技術革新によって、あなたをより強くする重要な方法はCCIE Wireless Exam (V2.0)試験認定を受けることです。だから、私たちの信頼できる高品質のCCIE有効練習問題集を選ぶと、350-050試験に合格し、より明るい未来を受け入れるのを助けます。
Cisco 350-050 試験シラバストピック:
| セクション | 目標 |
|---|---|
| トピック 1: 無線設計の原則 | - 高密度無線環境 - エンタープライズWLAN設計 |
| トピック 2: 無線LAN技術 | - IEEE 802.11規格 - 無線LANアーキテクチャ |
| トピック 3: Cisco無線インフラストラクチャ | - Cisco WLCのアーキテクチャと設定 - アクセスポイントの導入モデル |
| トピック 4: 無線セキュリティ | - 802.1XとRADIUSの統合 - 認証および暗号化方式 |
| トピック 5: 無線のトラブルシューティングと最適化 | - パフォーマンス分析 - 干渉およびカバレッジの問題 |
| トピック 6: 無線周波数(RF)の基礎 | - アンテナと信号の挙動 - RF伝搬の原理 |
Cisco CCIE Wireless Exam (V2.0) 認定 350-050 試験問題:
問題 #1
The IT manager acknowledges that some security issues that are shown in a detailed security index report violate company policies. However, the security index does not change after synchronizing the configuration of the Cisco WLC on Cisco WCS. What are two possible reasons for this issue? (Choose two.)
A. The acknowledged issue is on a controller that does not directly affect the security index score (for instance, it is not the controller with the highest score).
B. The acknowledged issue is on a WLAN that does not directly affect the security index score. Only the highest scoring WLAN of the highest scoring controller affects the security index score.
C. The acknowledged issue is on a controller that does not directly affect the security index score (for instance, it is not the controller with the lowest score).
D. The acknowledged issue is on a WLAN that does not directly affect the security index score. Only the lowest scoring WLAN of the lowest scoring controller affects the security index score.
問題 #2
Company ABC has a deployment plan that includes multiple controllers. To start the deployment and manage the controllers more efficiently, the IT administrator decides to use controller autoprovisioning on Cisco WCS. Which three controller options are available as matching criteria? (Choose three.)
A. device type
B. serial number
C. management IP address
D. UDI
E. MAC address
F. hostname
問題 #3
Refer to the exhibit.
You are a wireless specialist and have been called to inspect an existing wireless network that offers voice services. High channel utilization on 2.4 GHz has been reported. How can you solve this problem?
A. Disable data rates 1, 2, 5.5, 6, and 9 Mb/s; set 11 Mb/s as mandatory; and leave the other higher data rates as supported.
B. Enable at least five mandatory data rates.
C. Deselect DTPC, to avoid high channel utilization.
D. Disable higher data rates 36, 48, and 54 Mb/s, which increase channel utilization.
E. Enable lower data rates 1 and 2, to avoid sticky clients.
問題 #4
You are tasked to convert autonomous AP static WEP users to Cisco Unified WLC 802.1X EAP users using their current Microsoft Active Directory accounts using a single WLAN. You need to preserve the wired VLAN that these users were connecting on. Which of the below procedures provides the best solution for this conversion?
A. Configure the WLAN for Layer 2 security and use the WLC local RADIUS for
authentication.
Configure the WLC local RADIUS server to authenticate each user against the Microsoft
Active Directory.
Configure the WLC local RADIUS server to pass down IETF RADIUS attributes 64, 65, and
81 containing the appropriate Layer 2 VLAN to the users.
B. Configure the access point groups feature for two groups and map the WLAN to the correct
interfaces for each group.
Set the access points to the correct access point group for where these converted WEP
users will be located.
Connecting users will be placed on the correct Layer 2 VLAN.
C. Configure two WLANs, one WEP, and one with EAP, but only broadcast the EAP WLAN so
that only one SSID is visible.
Configure each WLAN interface mapping to the correct and corresponding dynamic
interface. Then, use the WLC local RADIUS to authenticate users against the current
Microsoft Active Directory.
Configure the WLC connecting trunk port to allow the appropriate user wired Layer 2
VLAN.
Configure the interface group feature to contain all of the dynamic interfaces needed.
Configure the single WLAN to use the interface group and authenticate to an external
RADIUS server configured to check the users against the Microsoft Active Directory.
The authenticated users will be placed on the correct VLANs dynamically.
D. Configure the WLAN for the appropriate Layer 2 security settings and ensure that AAA
override is configured.
Configure an external RADIUS server to authenticate each user against the Microsoft
Active Directory.
Configure the external RADIUS server to pass down IETF RADIUS attributes 64, 65, and
81 containing the appropriate Layer 2 VLAN to the users.
問題 #5
When is the Poor Link SNR Alarm generated in a mesh network?
A. when the SNR between the mesh nodes falls below 15 dB.
B. when the SNR between the mesh nodes falls below 12 dB.
C. when the Cisco WCS receives the first 10 SNR links from the network.
D. when the SNR between the client and the AP falls below 20 d
解説:
| 問題 #1 正解: C、D | 問題 #2 正解: B、E、F | 問題 #3 正解: A | 問題 #4 正解: D | 問題 #5 正解: B |

弊社は製品に自信を持っており、面倒な製品を提供していません。



Sakai

