信頼できるアフターサービス
私たちのGB0-341-ENU試験学習資料で試験準備は簡単ですが、使用中に問題が発生する可能性があります。GB0-341-ENU pdf版問題集に関する問題がある場合は、私たちに電子メールを送って、私たちの助けを求めることができます。たあなたが新旧の顧客であっても、私たちはできるだけ早くお客様のお手伝いをさせて頂きます。候補者がH3CSE-WLAN試験に合格する手助けをしている私たちのコミットメントは、当業界において大きな名声を獲得しています。一週24時間のサービスは弊社の態度を示しています。私たちは候補者の利益を考慮し、我々のGB0-341-ENU有用テスト参考書はあなたのGB0-341-ENU試験合格に最良の方法であることを保証します。
要するに、プロのGB0-341-ENU試験認定はあなた自身を計る最も効率的な方法であり、企業は教育の背景だけでなく、あなたの職業スキルによって従業員を採用することを指摘すると思います。世界中の技術革新によって、あなたをより強くする重要な方法はH3CSE-WLAN試験認定を受けることです。だから、私たちの信頼できる高品質のH3CSE WLAN Certification有効練習問題集を選ぶと、GB0-341-ENU試験に合格し、より明るい未来を受け入れるのを助けます。
現代IT業界の急速な発展、より多くの労働者、卒業生やIT専攻の他の人々は、昇進や高給などのチャンスを増やすために、プロのGB0-341-ENU試験認定を受ける必要があります。 試験に合格させる高品質のH3CSE-WLAN試験模擬pdf版があなたにとって最良の選択です。私たちのH3CSE-WLANテストトピック試験では、あなたは簡単にGB0-341-ENU試験に合格し、私たちのH3CSE-WLAN試験資料から多くのメリットを享受します。
本当質問と回答の練習モード
現代技術のおかげで、オンラインで学ぶことで人々はより広い範囲の知識(GB0-341-ENU有効な練習問題集)を知られるように、人々は電子機器の利便性に慣れてきました。このため、私たちはあなたの記憶能力を効果的かつ適切に高めるという目標をどのように達成するかに焦点を当てます。したがって、H3CSE WLAN Certification GB0-341-ENU練習問題と答えが最も効果的です。あなたはこのH3CSE-WLAN有用な試験参考書でコア知識を覚えていて、練習中にH3CSE-WLAN試験の内容も熟知されます。これは時間を節約し、効率的です。
GB0-341-ENU試験学習資料の三つバージョンの便利性
私たちの候補者はほとんどがオフィスワーカーです。あなたはH3CSE-WLAN試験の準備にあまり時間がかからないことを理解しています。したがって、異なるバージョンのGB0-341-ENU試験トピック問題をあなたに提供します。読んで簡単に印刷するには、PDFバージョンを選択して、メモを取るのは簡単です。 もしあなたがH3CSE-WLANの真のテスト環境に慣れるには、ソフト(PCテストエンジン)バージョンが最適です。そして最後のバージョン、GB0-341-ENUテストオンラインエンジンはどの電子機器でも使用でき、ほとんどの機能はソフトバージョンと同じです。H3CSE-WLAN試験勉強練習の3つのバージョンの柔軟性と機動性により、いつでもどこでも候補者が学習できます。私たちの候補者にとって選択は自由でそれは時間のロースを減少します。
H3CSE-WLAN 認定 GB0-341-ENU 試験問題:
1. Regarding the precautions in the wireless network survey and design process, which of the following statement is correct? (Multiple choice)
A) When configuring the frequency point of outdoor AP coverage area, in order to achieve effective coverage of AP and avoid mutual interference between channels, follow the cellular coverage principle of the mobile communication system during channel allocation.
B) In the WLAN project, it is necessary to understand the materials of the building and various surrounding substances through on-site surveys, and to estimate its influence on the wireless signal, so as to determine the safe installation location of the WLAN equipment.
C) When measuring the penetration loss of the AP signal from obstacles such as walls, the incident angle of the AP signal needs to be considered.
D) When configuring AP frequency points, first perform frequency detection on the target area, and avoid using channels that are already used by APs in the coverage area.
2. Which of the following descriptions of C H3C wireless P AP series products are correct? (Multiple choice)
A) WA2210-AG supports both 11a and 11g protocols, but it has only one radio frequency card and can only work in 11a or 11g mode.
B) Currently only WA2600 series APs support 802.11n protocol
C) WA2220-AG supports both 11a and 11g protocols, and has two radio frequency cards, which can work in both 11a and 11g modes at the same time
D) WA2110-AG supports both 11a and 11g protocols, but it has only one radio frequency card and can only work in 11a or 11g mode.
3. Which wireless protocol can work in the 2.4Ghz frequency band? (Multiple choice)
A) 802.11n
B) 802.11b
C) 802.11g
D) 802.11ac
E) 802.11a
4. In the configuration of the wireless controller function, if you need to modify the service template or the related configuration of the virtual wireless interface that is already in use, the first step is to configure ________.
A) port-security disable
B) service-template disable
C) undo wlan enable
D) radio disable
5. Which of the following descriptions of the room sub-system is correct? (Multiple choice)
A) The AP installation location should ensure that the Ethernet is reachable (less than 100 meters from the access switch), and local power supply should be guaranteed if there is no POE switch.
B) limited by the number of users; a single AP is connected to the number of antennas should not exceed 15.
C) According to the actual measurement experience, in the indoor distributed system, the wlan signal power of the antenna port is ideally about 10dBm, and the minimum is not less than 5dBm. Generally, the transmit power of the wlan AP junction point is at least not less than 3G/GSM/CDMA signal power.
D) AP junction point must be at the second stage of active equipment (mainly dry amplifier), because active equipment cannot pass wlan signals, and all wireless components of the feed-free system (including power splitters, cables, jumpers, etc.), must be able to support the WLAN frequency band (2.4GHZ~2.4835Ghz), and the attenuation control point is within a certain range.
E) It is generally not recommended to add a WLAN power amplifier behind the AP
質問と回答:
質問 # 1 正解: A、B、C、D | 質問 # 2 正解: A、B、C、D | 質問 # 3 正解: A、B、C | 質問 # 4 正解: B | 質問 # 5 正解: A、B、C、D、E |