Oracle Database 10g R2: Administering RAC試験学習資料での高い復習効率
ほとんどの候補者にとって、特にオフィスワーカー、1Z0-048試験の準備は、多くの時間とエネルギーを必要とする難しい作業です。だから、適切な1Z0-048試験資料を選択することは、1Z0-048試験にうまく合格するのに重要です。高い正確率がある1Z0-048有効学習資料によって、候補者はOracle Database 10g R2: Administering RAC試験のキーポイントを捉え、試験の内容を熟知します。あなたは約2日の時間をかけて我々の1Z0-048試験学習資料を練習し、1Z0-048試験に簡単でパスします。
Tech4Examはどんな学習資料を提供していますか?
現代技術は人々の生活と働きの仕方を革新します(1Z0-048試験学習資料)。 広く普及しているオンラインシステムとプラットフォームは最近の現象となり、IT業界は最も見通しがある業界(1Z0-048試験認定)となっています。 企業や機関では、候補者に優れた教育の背景が必要であるという事実にもかかわらず、プロフェッショナル認定のようなその他の要件があります。それを考慮すると、適切なOracle Oracle Database 10g R2: Administering RAC試験認定は候補者が高給と昇進を得られるのを助けます。
1Z0-048試験認定を取られるメリット
ほとんどの企業では従業員が専門試験の認定資格を取得する必要があるため、1Z0-048試験の認定資格がどれほど重要であるかわかります。テストに合格すれば、昇進のチャンスとより高い給料を得ることができます。あなたのプロフェッショナルな能力が権威によって認められると、それはあなたが急速に発展している情報技術に優れていることを意味し、上司や大学から注目を受けます。より明るい未来とより良い生活のために私たちの信頼性の高い1Z0-048最新試験問題集を選択しましょう。
1Z0-048試験学習資料を開発する専業チーム
私たちは1Z0-048試験認定分野でよく知られる会社として、プロのチームにOracle Database 10g R2: Administering RAC試験復習問題の研究と開発に専念する多くの専門家があります。したがって、我々のOther Oracle Certification試験学習資料が1Z0-048試験の一流復習資料であることを保証することができます。私たちは、Other Oracle Certification 1Z0-048試験サンプル問題の研究に約10年間集中して、候補者が1Z0-048試験に合格するという目標を決して変更しません。私たちの1Z0-048試験学習資料の質は、Oracle専門家の努力によって保証されています。それで、あなたは弊社を信じて、我々のOracle Database 10g R2: Administering RAC最新テスト問題集を選んでいます。
無料デモをごダウンロードいただけます
様々な復習資料が市場に出ていることから、多くの候補者は、どの資料が適切かを知りません。この状況を考慮に入れて、私たちはOracle 1Z0-048の無料ダウンロードデモを候補者に提供します。弊社のウェブサイトにアクセスしてOracle Database 10g R2: Administering RACデモをダウンロードするだけで、1Z0-048試験復習問題を購入するかどうかを判断するのに役立ちます。多数の新旧の顧客の訪問が当社の能力を証明しています。私たちの1Z0-048試験の学習教材は、私たちの市場におけるファーストクラスのものであり、あなたにとっても良い選択だと確信しています。
Oracle Database 10g R2: Administering RAC 認定 1Z0-048 試験問題:
1. Which two views can be used to identify SQL statements affected by interconnect latencies in your RAC environment? (Choose two.)
A) the VJSQL view
B) the VJSQLAREA view
C) the V$SQL_PLAN view
D) the VJSQLTEXT view
E) the VJSQL CURSOR view
2. After migrating from a 10g R1 cluster to 10g R2, you decide to multiplex your voting disk. Which are the two ways in which you can accomplish this task? (Choose two.)
A) You must add additional voting disks offline.
B) You can add additional voting disks online.
C) You may use the VIPCA utility to add new voting disks.
D) You should not use symbolic links.
E) You may use the command:
crsctl add ess votedisk <new voting disk path>
3. You defined the HR service using the following command:
srvctl add service -d RACDB -s HR -r RAC02.RAC03 -a RAC01
After a while, you realize that there is a workload peak on the HR service, and you decide to temporarily start HR on the RAC04 instance.
Which command or series of commands would you use to start HR on RAC04?
A) srvctl modify service -d RACDB -s HR -i RAC02.RAC03.RAC04 -a RAC01
B) srvctl modify service -d RACDB -s HR -i RAC02.RAC03.RAC04 -a RAC01 srvctl stop service -d RACDB -s HR srvctl start service -d RACDB -s HR
C) srvctl remove service -d RACDB -s HR Srvctl add service -d RACDB -s Hr-r RAC02.RAC03.RAC04 -a RAC01
D) srvctl remove service -d RACDB -s HR Srvctl add service -d RACDB -s Hr-r RAC02.RAC03.RAC04 -a RAC01 srvctl start service -d RACDB -s HR
E) srvctl start service -d RACDB -s HR -i RAC04
4. View the Exhibit, which displays the cluster database performance page after the same workload has been executed three times on your cluster without varying any non-Oracle workloads on the cluster. What are the two ways by which you can tell that the corresponding application was better tuned during the second and third execution? (Choose two.)
A) The number of transactions per second is getting higher each time.
B) The database throughout graphic is below the red dashed line during the last execution.
C) The run queue length is going down each time.
D) It takes less time to execute the workload each time.
E) There is less paging each time
5. After a power failure, you noticed that one of your cluster database instances did not start automatically, whereas all other instances came up successfully. What would you do to determine the precise cause for the instance startup failure? (Choose three.)
A) Check for OCR corruptions by using the OCRCHECK command.
B) Reboot the node where the failing instance resides to check if the problem is persistent.
C) Check the alert.log file that belongs to the instance that did not start.
D) Check the alert.log file that belongs to the Oracle Clusterware software.
E) Check the resource state by using the CRS_STAT command.
F) Enable extra debugging in the Oracle Clusterware software by using the CRSCTL command.
G) Check if the Oracle Clusterware is functional by using the CRSCTL command.
質問と回答:
質問 # 1 正解: A、B | 質問 # 2 正解: B、E | 質問 # 3 正解: B | 質問 # 4 正解: A、D | 質問 # 5 正解: C、D、E |